Item# P-01 8" Electric Bench Grinder...$69.99
FREE SHIPPING!!!!
- Color May Very
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- No-Load: 3450 rpm
- 1 Phase
- 1/2" Arbor
- Motor: 3/4 HP
- 1.5 Amp
- Full Ball Bearing
- Direct Drive Motor, No Brushes or Belts To Adjust or Replace
- Permanently Lubricated Motor Bearings For Long Life
- Adjustable Tool Rest
- Removable Wheel Cover
- Wire Wheel or Buffing Wheel May Put-on
Include:
1 Pc 8"x3/4" Fine Grinding Wheel
1 Pc 8"x3/4" Coarse Grinding Wheel
Weight: 28 Lbs
Item# P-02 6" Bench Grinder...$65.99
FREE SHIPPING!!!!
Features:
- UL Approved
- Voltage: 110 Vlt
- Frequency: 60 Hz
- No-Load: 3450 rpm
- Motor: 1/2 HP
- 2.68 Amp
- 1 Phase
- 1/2" Arbor
- Full Ball Bearing
- Direct Drive Motor, No Brushes or Belts To Adjust or Replace
- Permanently Lubricated Motor Bearings For Long Life
- Adjustable Tool Rest
- Removable Wheel Cover
- Wire Wheel or Buffing Wheel May Put-on
Include:
1 Pc 6"x3/4" Fine Grinding Wheel
1 Pc 6"x3/4" Coarse Grinding Wheel
Item# P-03 Electric Drill Bit Sharpener...$62.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Motor: 0.5 Amp
- Speed: 1720 RPM
- 2 Head Motor Working Capacity: 1/8" To 3/8" Or 5/16" To 5/8"
- Grinding Wheel Material: A80L7 Or WA80L7
- Used For Grinding: Carbon Steel Or High Speed Steel Drill Bits
- High Impact Plastic Housing
- Rubber Feet Are Slip Resistant... Provide Extra Stability
- Thermally Protected
- Rear Mounted On/Off Switch
Weight: 5.75 Lbs
Features:
- Voltage: 120 Vlt
- Frequency: 60 Hz
- Rated Amps: 3.8 Amp
- Reversible
- Variable Speed: 0 - 1400 rpm
- Chuck Capacity: 3/8"
Weight: 4 Lbs
Item# P-04 Close Quarter Drill...$52.99
FREE SHIPPING!!!!
Item# P-05 1/2" Electric Drill...$29.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- 500 Watts
- Reversible
- 2 Speed
With Level and Belt Hook
Weight: 4 Lbs
Item# P-06 3/8" Electric Drill...$29.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- 500 Watts
- Reversible
With Level and Belt Hook
Weight: 3.25 Lbs
Capacities:
- 120V 60Hz 7.5 Amp
- 550 RPM
- 7.1 Lbs.
Features:
- UL Listed
- 1/2" Key Chuck
- High Torque
- Rocker Switch for One Hand Reversing
- 3-Position Auxiliary Front Handle
- D-Handle Rotates 360 degrees
- Soft Grip
- Supplied With 6 Cobalt Drill Bits
Weight: 10.50 Lbs.
Item# P-07 1/2" Industrial Torque Drill...$66.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Power: 2.5 HP - 15 Amps
- No Load Speed: 1750/2450 rpm
- 1 Pc 10" Wet Cutting Diamond Blade
- Cut Up To 18" Long, 12" Diagonally
- 5/8" Arbor Shaft
- Max Cutting Depth: 3 - 4 Inch
- Work Table Size: 16-1/2x11 Inch
- Dimensions:
40"(L) x 22" (W) x 53" (H)
- Water Pump and Attachments
- Angle Cutting Tray
- Thermal Overload Protection
- UL Listed
Weight: 160 Lbs
Item# P-08 10" Electric Tile\Marble Saw Machine W\Stand....$412.99
FREE SHIPPING!!!!
Item# P-09 7" Wet Tile Saw/Cutter...$91.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Power: 500 Watts
- No Load Speed: 2800/3500 rpm
- Max Saw Height: 1-3/8 Inch
- Work Table Size: 15-1/2x15 Inch
- Water Tray
Weight: 32 Lbs
Made By:
SKIL POWER TOOLS COMPANY
4300 W. Peterson Ave.
Chicago, IL 60646
Features:
- Voltage: 120 Vlt \ 10 Amps
- Power: 2 HP
- Frequency: 60 Hz
- Base Diameter: 6"
- Variable Speed: 8000 - 25000 RPM
- Collet Capacity: 1/4"
- Double Insulated
- 1 Pc Plastic or Metal Case
- SKIL's Full 1 Year Warranty For Defective Material And
Workmanship.
Weight: 15 Lbs
Item# P-10 Skil Plunge Router....$135.99
FREE SHIPPING!!!!
Item# P-11 Deluxe Router Table....$98.99
FREE SHIPPING!!!!
Fits Most Routers With Up To 6" Diameter Base Plate
UL Approved
Dimensions:
34" (L) x 13-1/8" (W) x 11" (H)
Converts Routers Into a Stationary Power Tools
Over 450 Square Inches Of Durable Aluminum Work Surface
Master Power Switch: Control Router
Multi Functional Fence: Makes joiner cuts easy
Build In Scale: For quick and accurate indexing
Dust Port: 2-1/2" Dust collection port fits your Wet/Dry Vacuum and keeps work area clean
Miter Gauge: For tough angled cuts
Jointer Pocket Fence: Push out pocket fence add jointing capabilities to straighten board edges
Extension Set: Adds over 200 square inches of work space
Multi-Functional Fence: Unique solid design is multifunctional and equipped with built in guard
Die Cast Aluminum Top: Light weight yet strong. Grooved surface keeps dust and chips away from work piece
Some Assembly Required
Weight: 29 Lbs
Item# P-12 39-1/2" Lathe....$318.99
FREE SHIPPING!!!!
Features:
- Voltage: 120 Vlt
- Frequency: 60 Hz
- Motor Power: 1/2 HP
- Spindle Speed:
4 speeds: 980 1430 2060 3010 RPM
Specifications:
Maximum Length Of Cutting Feed: 39-1/4" (1000 mm)
Maximum Diameter: 14-1/4" (365 mm)
Height Of Cutting Tool: 7" (178 mm)
Motor Power: Single Phase 350 Watts
Weight: 69 Lbs
Item# P-13 Mini Lathe...$269.99
FREE SHIPPING!!!!
Features:
- Voltage: 120 Vlt
- Frequency: 60 Hz
Specifications:
- Overall Length:
30" (L) x 11" (W) x 15" (H)
- Length Of Cutting Feed: 18"
- Maximum Diameter: 6"
- Motor Power: 1/2 HP 1 Phase
- 5 Spindle Speed:
(760, 1100, 1600, 2200, 3200 rpm)
- Includes 3" Face Plate, 6" Tool Rest
Weight: 82 Lbs
Item# P-14 Bench Top Drill Press...$99.99
FREE SHIPPING!!!!
Features:
- Voltage: 120 Vlt
- Frequency: 60 Hz
- Max HP: 1/3 HP
- Chuck Size: 1/2"
- Adjustable Depth Stop
- Table Tilts From 0 - 45 Degrees
- Motor Spins At 5 Speed:
1st - 585 RPM
2nd - 1040 RPM
3rd - 1510 RPM
4th - 2150 RPM
5th - 3000 RPM
- Overall High: 24" - Quick Belt Tension Release For Easy Speed Changes.
Weight: 35 Lbs
Item# P-15 Floor Stand Drill Press...$219.99
FREE SHIPPING!!!!
Features:
- Voltage: 120 Vlt
- Frequency: 60 Hz
- Motor: 375 Watts
- Chuck Size: 5/8"
- Adjustable Depth Stop
- Table Tilts From 0 - 45 Degrees
- Motor Spins At 5 Speed: 210 To 2500 RPM
- Quick Belt Tension Release For Easy Speed Changes.
- Maximum Distance From Spindle Nose To Working Table: 18-1/4"
- Maximum Distance From Spindle Nose To Base: 25-1/2"
- Base Dimensions: 7-7/8" x 7-7/8"
Weight: 115 Lbs
Item# P-16 20 Gallon Electric Parts Washer...$171.99
FREE SHIPPING!!!!
Features:
- Voltage: 120 Vlt
- Frequency: 60 Hz
- Tank Capacity: 20 Gallons
- Used: Petroleum or Biodegradable Based Solvents
- Under Some States Laws:
ONLY USE WATER OR HOUSEHOLD DETERGENTS
- Heavy Duty Removable Work Shelf
Dimensions: 28-1/2" (W ) x 19-1/4" (L) x 10-5/16 (D)
20 Gallons Recirculates 50 Gallons Of Solvent Per Hour
Weight: 59 Lbs
Features:
- Voltage: 120 Vlt
- Frequency: 60 Hz
- Motor: 2 HP, 13 Amp,
- No Load Speed: 4500 RPM
- Watts: 1500W
- Table: Aluminum Alloy 27-1/2" (700mm) x 18-1/4" (465mm)
- Rip Fence: Adjustable 17-7/8" x 2" With Inch/Metric scale
- Blade Adjustments Control Angle And Depth Of Cut.
- Anti-Kickback Fingers
- See-Through Blade Guard For Safety.
- Maximum Cut Depth:
90 Degree: 3"
45 Degree: 2-1/2".
- Miter Gauge Adjustment: 0 To 60 Degree, Left And Right.
- Cutting: 50mm Soft Wood
Weight: 52 Lbs
Item# P-17 10" Table Saw...$199.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Power: 1650 Watts (14 Amps)
- No Load Speed: 4500 rpm
- Blade Arbor: 1"
- Electric Brake
- Bevel Cut From Right Side
- Cut at: 0 & 45 Degrees
Sliding Cut: 3-1/2" Thick x 12" Long
Non-Sliding Cut: 3" Thick x 5-1/2" Long
Weight: 46 Lbs
Item# P-18 10" Sliding Mitre Saw....195.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Power: 2000 Watts
- No Load Speed: 3600 rpm
- Electric Brake
- Arbor Size: 1"
Weight: 35 Lbs
Item# P-19 14" Cut Off Saw/ Chop Saw...$99.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Motor Size: 1/3 HP, Single Phase - Power: 300 Watts
- Drive System: Direct
- No Load Speed: 1650 RPM
- Drive System: Direct
- Throat Capacity: 8"
- Cutting Thickness Capacity: 3-3/8"
- Table Size: 11-3/8" x 11-3/8"
- Table Adjustment: 0 To 45 Degrees
- Blade Length: 56-1/8"
- Blade Width: 1/4"
- Blade Surface Speed: 3600 SFM
- Dust Port: 1-3/4"
- Switch Type: Childproof Safety
Weight: 40 Lbs
Item# P-20 8" Band Saw...$155.99
FREE SHIPPING!!!!
Item# P-21 Biscuit Jointer...$58.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Motor Power: 700 Watts
- No Load Speed : 10000 rpm
- Maximum Cut Depth: 1 Inch
- It Can Be Used To Cut #0, #10 And #20 Slots At 45 And 90 Degrees
Includes:
- 2 Pcs Wrench
- 1 Pair Carbon Brushes
- 1 Pc Allen Wrench
- 1 Pc Glue Bottle
- 1 Pc Dust Bag
- 1 Pc Blade
- Blow Mold Case
Biscuit Jointer Is Designed For Creating Joints In Lumber And Pressed Woods.
Weight: 9 Lbs
Item# P-22 Rotary Die Grinder Tool kit...$38.99
FREE SHIPPING!!!!
Features:
- Voltage: 110 Vlt VAC or 3.6 VDC
- Frequency: 60 Hz
- No-Load Speed: 10,000 RPM
Contents:
10 Pcs Mounted Stone Set
6 Pcs Sanding Drum Set
3 Pcs Wire Wheel Set
4 Pcs Drill Bits
1 Pc Engraving Bit
5 Pcs Cut-Off Wheel Set
2 Pcs Connective Posts
4 Pcs Buffing Wheel Set
20 Pcs Diamond Burr Set
2 Pcs Collet: 1/32" & 1/8"
Weight: 3.5 Lbs
Features:
- Work As a Rotary Hammer Drill and Hammer Drill
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Power: 520 Watts
- Rotary Speed: 450 rpm
- Impact Frequency: 2900 r/min
- Use SDS ( Plus )Drill Bits
- 1 Pc: Cold Chisel
- 2 Pcs: Masonry Drill Bit
LUBRICATION:
Low viscosity grease should be applied to the Hammer Drill so that it can be used for a long period without replacing the grease.
Weight: 17 Lbs
Item# P-23 1" Hammer Drill...$76.99
FREE SHIPPING!!!!
Item# P-24 1/2" Impact Wrench...$73.99
FREE SHIPPING!!!!
Features:
- Voltage: 120 Vlt
- Frequency: 60 Hz
- Double Insulated
- Motor Power: 700 Watts
- Max Torque: 235 Ft/lb
- No Load Speed: 2100 rpm / 2700 BPM
- Forward / Reverse Switch
Weight: 10 Lbs
Features:
- Voltage: 110 Vlt
- Frequency: 60 Hz
- Amps: 2.4 Amp
- Speed : 16000 rpm
- Maximum Cut: 1 Inch
- V-groove to help guide in chamfering. Depth adjustment knob.
- Planing width: 3-1/4 Inch
- Blade cutter: 34000 Cuts per Minute
Weight: 7 Lbs
Item# P-25 Wood Planer...$46.99
FREE SHIPPING!!!!
UL Approved
- Voltage:110V/60Hz
- Rated Input Power: 250 Watts
- Belt Size: 1"x30"
- No-Load Speed: 3400 RPM
- Belt Speed: 16.4 Mt/Mn.
- Disc Speed: 3400 RPM
- Safety On/Off Switch
- Work Table Tilt: 0 to 45 Degrees
Weight: 18 Lbs
Item# P-26 Bench Top Belt Sander...$115.99
FREE SHIPPING!!!!
- Voltage:110V/60Hz
- Rated input power: 700 Watts
- Belt size: 3"x21"
- Belt speed: 380 Mt/Min
- Easy release belt level for quick belt changes
- Dust bag for clean operation.
- Easy belt adjustment
Weight: 15 Lbs
Item# P-27 Hand Belt Sander...$63.99
FREE SHIPPING!!!!
Drill:
- Rated Voltage: 110 Vlt
- Frequency: 60 Hz
- Variable Speed: 2200 - 2800 RPM
- Two Hammer Speed:
35000 & 44000 BPM
- Power: 500 Watts \ 4.5 Amps
- Chuck Size: 1/2"
- Ball Bearing Construction
- Reversible
- Adjustable Side Handle
- Hammer Or Standard Drilling Switch
Angle Grinder:
- Rated Voltage: 110 Vlt
- Frequency: 60 Hz
- Power: 500 Watts \ 4.5 Amps
- No Load Speed: 11000 rpm
- Ball Bearing Construction
- Adjustable Blade Guard
- Right Or Left Side Handle
Accessories:
9 Pcs Metal\Wood\Masonry Drill Bits
5 Pcs 1/4" Shank Mounted Stones
1 Pc 4-1/2" Grinding Wheel
1 Pc 4-1/2" Diamond Wet Or Dry Cutting Blade
2 Pcs Wrench
1 Pc Blow Mold Case
Weight: 10 Lbs
Item# P-28 2 pcs Tool Kit...$73.99
FREE SHIPPING!!!!
Item# P-29 Metal Cutting Band Saw...$359.99
FREE SHIPPING!!!!
Heavy duty 2 way band saw operates at 3 speeds giving you the versatility to cut everything from soft brass and aluminum to rugged alloy and steels
In horizontal position use the gravity feed adjustment to increase or decrease cutting pressure or vertical position with 10" x 10" table
Cutting capacity: 4" x 6" (rectangle), 4 1/2" (round)
Blade size: 1/2"(w) x 0.03"(T) x 64 1/2" (L)
14 teeth per inch
Blade speeds: 80, 120, 200 SFPM
Bed width: 7 1/2", Vise: 7 3/4" x 6 1/4"
Overall length: 37", Height: 3/8" (horizontal), 54" (vertical)
Motor 3/4HP, 4 pole, cycles 60Hz
Vice 45 degree swivel
Shipping weight: 121 lbs.
Whether you are a hobbyist or a professional metal worker, this 7 x 12 mini metal lathe will be a quality addition to your tool collection. Use this lathe to machine parts for all types of tools and equipment. This precision mini lathe is designed to perform various types of processing jobs such as mini precision parts, samples and models. Counterface turning, drilling, threading and cutting jobs on materials made up of round bar and bar materials can be performed using this machine.
The lathe bed is made of high grade iron. The hardness and rigidity of the lathe and accuracy of the z-slideways are obtained by quality raw materials, heat hardening and grinding.
Distance between centers: 12"
Maximum length of workpiece: 300mm
Maximum swing over bed: 180mm
Spindle Taper: Morse #3
Tailstock Taper: Morse #2
Spindle Bore: 20mm
Cross Slide Travel: 65mm
Compound Slide Travel: 55mm (effective)
Spindle Speed (adjustable): 100 - 2500 RPM (effective)
Longitudinal feeds: 0.1 - 0.2mm
Screw Threads:
Imperial: 12 - 52 TPI in 18 steps
Metric: 0.4 - 2.0mm in 10 steps
Spindle flange: has 6 holes for mounting the 3 jaw self centering chuck (included) and can accommodate a range of fixtures such as d Face Plate, 4 jaw chuck, etc.
Includes:
Tailstock Drill Chuck 1-13mm (with key)
Moving Steady
Fixed Steady
6 1/4" diameter Face Plate
Allen Wrench set
Gear set:
Imperial-Z: 30, 35, 40, 40, 45, 50, 55, 57, 60, 65
Oil Bottle
#2 Morse Taper Center (for tailstock)
3 External Jaws (for 3 Jaw Chuck)
2 - open end wrench's 8/10mm, 14/17mm
5 piece Cutting Tool Set: 8x8mm
1 spare fuse
Item# P-30 Metal Precision Lathe...$524.99
FREE SHIPPING!!!!
This Ryobi® surface planer has a powerful 15 amp motor with sufficient power to handle tough cutting jobs. The infeed and outfeed rollers automatically feed the wood through the planer. The cutter head assembly controls the depth of cut and can be locked in place. The depth adjustment handle raises and lowers the cutter head assembly. A depth gauge is located on the front of the planer and measures depth of cuts up to 1/8". This planer is equipped with an exclusive Ryobi Rapid Set blade changing system which is designed to reduce time when changing blades. It also helps eliminate score marks produced by nicks and chips in blades. The replane indicator has preset measurements for repetitive planing. This is the perfect power tool to add to your wood working shop.
Features:
15 amp motor with externally accessible brushes
Replane gauge allows 8 depth stops to accurately plane work piece to desired thickness up to 1 3/4"
Planing depth gauge measures cutting depth before each pass
Integrated storage compartment for all-purpose tool and pencil storage
Rear mounted cord storage for easy transport
Specifications:
Input: 120v AC, 15 amp
Drive system: Belt
Knife system: Rapid Set double-edged knives
Spindle speed: 9900 RPM
Planing height: 6" Max
Planing width: 13" Max.
Planing depth: 1/8" Max for nominal 6" width or less
Feed rate: 25 FPM
Cord length: 9 ft
Factory Serviced
1 Year Ryobi Factory Warranty
Item# P-31 Ryobi 13" Surface Wood Planer...$369.99
FREE SHIPPING!!!!
Item# M-19 Meat Band Saw and Meat Grinder Combo...$355.99
FREE SHIPPING!!!!
Great for the hunting enthusiast to cut up wild game
Save money and butcher your own meat at home
Can be used to cut up those big fish
550 watt saw
Cuts through the thick meat with a blade speed of 15.55 feet per second
Maximum cutting width: 9 7/8"
Maximum cutting depth: 9 7/16"
You can accommodate larger cuts of meat with this saw
Table size: 18.5" x 23.625"
Saw blade: 5/8" wide x 82" long saw blade
120v, 60Hz
